Pre-assigned Sensors: Pair them as fast as you can thread them on
Most TPMS systems take 10-20 minutes to set up and pair all sensors. The more sensors you have, the longer it takes. Tire Patrol expedites the process with pre-assigned sensors labeled for each tire. When you know which sensor goes to which tire, you can pair and re-connect as fast as it takes to thread on all the sensors.
|
Crucial Data: Know your tire pressures
Tire Patrol provides all the critical info needed to know exactly how a tire is performing in real-time. Monitor real-time tire pressures and temperatures, as well as receive alerts in case of a blowout, low PSI, high PSI, and even high temperature in a tire. Tire data is transmitted every 3 minutes, and the sensor does a tire diagnostic every 3 seconds. If an issue is detected the sensor transmits immediately.
|
Durable Construction: Quality sensors built to last
Tire Patrol is built to thrive in the elements. Each sensor is made of an ABS plastic blend, which is the gold standard in durable plastics manufacturing. Sensors are sealed with a process called sonic welding keeping out water to protect components. For the threads, we chose brass composite because brass is known for its durability, resistance to corrosion, and it's lightweight. This light-weight sensor avoids affecting the balance of your tires and damage to your valve stems.
|
Battery Intelligence: Sensors that last
To prolong battery life, Tire Patrol sensors go into battery save mode unless pressure is detected and/or the tires are rotating. Because of these advancements, each sensor’s battery can lasts an average of 2+ years. NOTE: Leaving sensors on your tires at all times can reduce that lifespan significantly. For this reason, we do recommend removing sensors between trips.
NOTE: When the batteries need to be replaced, you simply email in a copy of your original receipt for the sensors and we ship you new sensors for $16/sensor. Click HERE to begin battery replacement process.
|
|
The Tire Patrol tire pressure monitoring system is monitored with the Command Center tablet and hub. This system is the epicenter of the RVi product line. One monitor with unlimited product expansion and built-in Travel Checklist, RV Level and Support apps. You are going to love Command Center!
Learn more about Command Center tablet and hub
=
|
All Pressures, One Screen
- Choosing the correct settings
- Monitoring the tire pressures in real-time
- Alerts you of a flat tire, low tire, or high temperature
We dare you not to smile every time you snap the tablet to it magnetic dash mount.
|
TIRE PATROL VEHICLES
Tire Patrol allows you to monitor up to 14 tires on 2 vehicles at a time.
|
See which packs go with which vehicles HERE
|
See other Command Center products
Warning: When threading your sensors on, make sure you have a minimum of 1” in every direction. If a sensor is too close to the tire rim, then the centrifugal force while driving can cause impacts to occur, which can, in turn, cause sensors to split. If you do not have a minimum of 1” distance on all sides of your sensors, then you must use valve stem extenders to get them away from your rims. RVi is not responsible for damage or failures caused by failure to follow this direction.
TECH SPECS:
Weight: 0.3 ounces per sensor
Dimensions: 1" x 1"
PSI Accuracy: Within 1.5 PSI
Setup Time: 3 minutes
Battery Life: 2-3 years depending on use. (We have an inexpensive replacement program through the factory.)
Vehicles Monitored: Up to 14 tires on two vehicles at a time
Warranty: 1 year
See how the Tire Patrol compares with it's competitors.
|
Watch all Tire Patrol videos
|
Have more questions? Check out the FAQ
Watch Unboxing Tire Patrol Video